Data and Card Planner

Plan the data side of a shoot: how many cards each camera needs, how long offloads take, and how many drives the job fills. Data rates come from the camera database and cards from the media database.

The shoot

Recorded time, not hours on set. Scripted drama often rolls 1 to 2 hours a day per camera; documentary, reality and events can roll 4 to 8.

Cards

Offload and storage

Copies are written at the same time, so the slowest of card, reader and destination sets the pace. A checksum verify reads everything back, which roughly doubles offload time.

Plan

Choose a camera and a recording mode.

Estimates only. Data rates and card figures come from the makers’ published documents (rates marked calculated are worked out from them), and real offload speeds vary with the computer, cables and software. Not guaranteed to be accurate; always test your own workflow before the shoot.

How the Data and Card Planner works

Running out of cards, or running out of time to offload them, stops a shoot. The planner works out the data side of a job from the camera’s real data rate, so a producer, DP or DIT can see the cards, offload time and drives a shoot needs before it starts.

The calculations

  • Data per hour is the mode’s data rate in MB/s multiplied by 3,600 seconds. The rates come from the camera database. Where the camera maker does not publish a rate, it is worked out from the maker’s own figures and marked calculated.
  • Recording time per card uses 96% of the card’s printed capacity, allowing for formatting.
  • Cards for a day is the day’s footage per camera divided by one card’s usable capacity, rounded up.
  • Offload time is set by the slowest of the card, the reader and the destination drive. A checksum verify reads everything back, so a verified offload takes about twice as long as a plain copy.
  • Drives are filled to 90% of their capacity, leaving room for the drive to work well and for a re-copy if needed.

Choosing the recorded hours

The most uncertain number is how much footage you roll each day. It varies hugely by type of production, so if you have records from similar jobs, use them. As a starting point, scripted drama often rolls one to two hours a day per camera, while documentary, reality and event work can roll four to eight.

Reading the warnings

If a camera fills its cards faster than one card can be offloaded and returned, the planner says so. The fixes are more cards per camera, a faster offload setup, or a second offload station. It also flags any card whose published sustained write speed is below the recording mode’s data rate.

Frequently asked questions

Why are my real offloads slower than the plan? Real speeds depend on the computer’s ports, cables, software, the drive’s free space and how many copies run at once. Time a test offload during prep and enter that speed.

How many copies should I keep? Most productions keep at least two copies on separate drives before a card is cleared, and many keep three with one off site.

Scroll to Top