ARRIFLEX 16SR 3 Specs

Camera specs · ARRI

The ARRIFLEX 16SR 3 belongs to ARRI’s ARRIFLEX family and was announced in 1992. Its sensor measures 12.35 x 7.5 mm, a small sensor, 1-inch type or smaller, with a crop factor of about 2.99 against full frame 35 mm. It shoots 16mm film in 1-perf formats at up to 75 fps.

ARRIFLEX 16SR 3 specifications

Sensor size12.35 x 7.5 mm (14.4 mm diagonal)
Shuttermirror shutter
Lens mount54 mm PL
Power input24 V DC
Film formats16mm
MovementKinematic film movement with pitch adjustment, designed for quiet running; jointed pull-down film transport claw with a registration pin (16SR 3 Instruction Manual, paraphrased by the extraction tool).
Max shutter angle180 degrees
Magazines (ft)400
Highest frame rate75 fps
Announced1992

ARRIFLEX 16SR 3 film formats and magazine run times

Each film format the ARRIFLEX 16SR 3 shoots, with its gate size and how long a magazine lasts at 24 fps. Run time is the magazine length divided by the feet of film used per minute.

FormatGauge, perfsGate (mm)Feet per min at 24 fps400 ft mag
Normal 1616mm, 1-perf10.3 x 7.53611 min
Super 1616mm, 1-perf12.35 x 7.53611 min

At 24 fps the first format above uses 36 feet a minute, so a 400 ft magazine runs for about 11 min. Shooting at higher frame rates uses film proportionally faster: at 48 fps the same magazine lasts half as long.

Cameras similar to the ARRIFLEX 16SR 3

Bodies in the camera specs pages with the closest sensor size and age, for comparison.

CameraSensorTop data rateHighest resolutionAnnounced
ARRIFLEX 16SR 3 (this page)12.35 x 7.5 mmn/an/a1992
ARRIFLEX 41616mm filmn/an/an/a
ARRIFLEX 16S10.26 x 7.49 mmn/an/an/a
ARRIFLEX 16BL10.26 x 7.49 mmn/an/a1965
ARRIFLEX 43535mm filmn/an/a1994
ARRIFLEX 435 Xtreme35mm filmn/an/an/a
ARRICAM LT35mm filmn/an/a2000

Lenses that cover the ARRIFLEX 16SR 3 sensor

Covering the full 12.35 x 7.5 mm sensor needs an image circle of at least 14.4 mm. 1449 lenses (304 series) in the Luminxel lens database have a maker-published image circle that large. Recording modes that crop the sensor need less: the coverage check draws any lens over any mode to scale.

ARRIFLEX 16SR 3 FAQ

What is the sensor size of the ARRIFLEX 16SR 3?

The ARRIFLEX 16SR 3 sensor measures 12.35 x 7.5 mm.

Sources

Figures come from ARRI’s own published documents: product page, manual, checked for the Luminxel camera database. They are not guaranteed to be accurate or current; check the maker’s latest documents before a shoot. Last updated 14 November 2026.

Scroll to Top