Battery Database

Camera batteries in V-mount, B-mount, Gold Mount, NP-F and the camera makers’ own packs, with each maker’s published capacity, voltage, maximum draw and weight, the airline band each one falls in, and a runtime calculator that uses the power draw each camera maker publishes.

…Loading the battery data
BatteryMountWhVolts Max drawWeightAirline bandPrice

Figures come from the battery and camera makers’ own published documents, with the source on every battery. They are not guaranteed to be accurate or current, and the database may not be copied. Airline rules vary: check your airline and the current IATA guidance before you fly.

Understanding camera batteries

Camera batteries are rated in a few different ways, and the right battery depends on the camera’s mount, how much power the camera and its accessories draw, and whether the batteries have to fly. Here is how to read the figures in this database.

Battery mounts

  • V-mount is the most common professional mount, with a nominal voltage around 14.4 to 14.8 V. Many cinema cameras, monitors and wireless systems run from it.
  • Gold Mount (3-stud), from Anton/Bauer, is the other long-standing professional mount at a similar voltage. Gold Mount Plus adds communication and higher power.
  • B-mount was introduced for 26 V cameras such as the ARRI ALEXA 35, and offers more power for large cameras and accessories.
  • NP-F (L-series) packs are smaller 7.2 V batteries used on monitors, lights and small cameras.
  • Camera packs such as Canon LP-E6, Sony NP-FZ100 and Fujifilm NP-W235 fit inside mirrorless and hybrid bodies.

Watt-hours, milliamp-hours and volts

Watt-hours (Wh) is the most useful figure: it is the energy stored, and it works across batteries of different voltages. Milliamp-hours (mAh) only compare batteries at the same voltage. To convert, multiply amp-hours by the nominal voltage: a 14.8 V battery rated at 6,600 mAh holds about 98 Wh.

How long will a battery last?

Divide the battery’s watt-hours by the total power draw in watts. A 98 Wh battery on a camera drawing 30 W lasts a little over three hours in theory. In practice, plan with less: losses in conversion, ageing and cold weather all cut the usable energy, so the runtime calculator uses 85% of the rated capacity by default. Monitors, wireless video, lens motors and other accessories add to the draw, often doubling it on a fully built camera.

Maximum draw

Every battery has a maximum continuous current or power it can deliver. A large camera with accessories can exceed what a small battery can supply, which causes shutdowns even when the battery is not empty. The runtime calculator warns when the total draw is above a battery’s published maximum.

Flying with batteries

Airline rules for lithium-ion batteries are based on watt-hours. Under the IATA guidance most airlines follow, spare batteries travel in carry-on baggage, not checked baggage. Batteries up to 100 Wh are generally allowed; batteries from 100 to 160 Wh need airline approval and are usually limited to two spares per person; batteries over 160 Wh are not allowed as passenger baggage. This database shows the band for every battery with a published capacity. Rules change and airlines can be stricter, so check with your airline before you fly.

Frequently asked questions

Can I use a V-mount battery on a B-mount camera? Only through an adapter plate that supports the camera’s voltage and power needs. Check the camera maker’s guidance.

Why do some cameras list a power draw range? Power draw changes with the recording mode, frame rate, fan setting and connected accessories. Camera makers often publish a typical figure; the calculator uses that figure and lets you enter your own.

Scroll to Top