Media Database

Camera recording media: CFexpress, SD, CFast, XQD, SxS, AXS and the cinema makers’ own drives, with each card maker’s published capacity and speeds, which camera makers certify each card, and how long each card records for every mode in the camera database.

…Loading the media data
CardFormatCapacity ReadWrite SustainedRating PriceCertified

Figures come from the card and camera makers’ own published documents, with the source on every card. They are not guaranteed to be accurate or current, and the database may not be copied. Check the maker’s latest compatibility list before a shoot.

How to choose a memory card for video

A camera card has to do one job without fail: take the camera’s data as fast as the camera writes it, for as long as the camera records, without dropping a frame. The figures on the packaging do not all mean the same thing, so it helps to know which ones matter.

Peak speed versus sustained speed

Most cards advertise an “up to” read and write speed. That is a peak figure, measured in ideal conditions over a short burst. Video recording needs a speed the card can hold for minutes at a time, even as it fills and warms up. That is the sustained or minimum write speed. Where a card maker publishes it, this database shows it in the Sustained column, and the Recording time tab flags any card whose sustained speed is below a mode’s data rate.

Speed class labels

  • Video Speed Class (V30, V60, V90) on SD and microSD cards is a minimum sustained write of 30, 60 or 90 MB/s, set by the SD Association.
  • UHS Speed Class (U1, U3) is a minimum of 10 or 30 MB/s. UHS-I and UHS-II describe the bus (the card’s connection), not a guaranteed speed.
  • VPG (Video Performance Guarantee) on CFexpress and CFast cards, such as VPG200 and VPG400, is a minimum sustained write of 200 or 400 MB/s set by the CompactFlash Association.
  • CFexpress 4.0 cards use a faster connection than CFexpress 2.0, but they only run faster in a camera or reader built for 4.0.

Why camera makers publish card lists

Even a fast card can stutter in a particular camera because of firmware, file system behaviour or heat. Camera makers test cards in their own bodies and publish lists of the ones they have confirmed, often with conditions such as “for 8K RAW” or “slot 1 only”. The Certified by camera tab collects those lists. If a card is not on the list, it may still work, but it has not been confirmed by the camera maker.

Working out recording time

Recording time is the card’s usable capacity divided by the data rate. Cards lose a little of their printed capacity to formatting, so this database plans with 96% of the label figure. A 1 TB card holds about 960 GB, so at 400 MB/s it records for about 40 minutes. The Data and Card Planner takes this further, with card counts for a whole day, offload times and drives.

Frequently asked questions

Does a bigger card record better footage? No. Capacity only changes how long the card lasts. Quality is set by the camera’s recording mode.

Can I use a CFexpress Type A card in a Type B slot? No. Type A and Type B are different physical sizes. Some cameras have combination slots that take CFexpress Type A and SD; check the camera’s own specification.

Why is the same card listed twice? Some makers sell the same card under different part numbers in different regions, or in a CFexpress 2.0 and a 4.0 version. Each row shows its own part number and source.

Scroll to Top